Cyclospora Stain Kit - Solution II - 10% Sulfuric Acid (2 x 250mL)

$76.00
SKU:
6467
Brand:
ENG Scientific
Quantity:
2 x 250mL
Unit of Measure:
PK

A staining kit comprising two bottles of 10% sulfuric acid solution for use in Cyclospora staining procedures, facilitating the visualization and detection of Cyclospora oocysts in fecal specimens for the diagnosis of Cyclospora infections.

(No reviews yet)
Current Stock:
Adding to cart… The item has been added
  • Solution I - Carbol Fuchsin
  • Solution II - Acid Alcohol (10% Sulfuric)
  • Solution III - Malachite Green

CONTENTS: Basic Fuchsin, Ethanol, Phenol, Sulfuric Acid, Malachite Green

These solutions are made from certified dyes (when applicable).

FOR IN VITRO DIAGNOSTIC USE ONLY.

RECOMMENDED PROCEDURE: Specimen may be prepared from fresh material or preserved in 10% buffered formalin (Product # 9700). Formalin-preserved Specimens: Mix stool specimen thoroughly and filter an adequate amount through cheesecloth into a centrifuge tube. Centrifuge for 2 minutes and decant supernatant. Smear 1 to 2 drops of specimen on a glass slide (either concentrate or original specimen). Heat fix on slide warmer until dry (about 5 minutes). Fresh Stool Specimens: Prepare smear utilizing the same procedure as for a formalin-fixed specimen. Fix slide in absolute methanol - 30 seconds. Flood slide with Sol. I for 1 minute. (Enhanced staining can be obtained by increasing time or applying heat). Rinse with distilled water and drain. Decolorize with Sol. II for 2 minutes. Rinse with distilled water and drain. Counterstain with Sol. III for 2 minutes. Rinse briefly with distilled water and drain. Dry on slide warmer until dry and mount.

RESULTS: Cyclospora oocysts stain light pink to deep red measuring 8-10 microns.

Safety Data Sheet - Cyclospora Stain Kit (Solution II)

UPC:
12352142
Availability:
Lead Time: 3-5 Days
Type:
Cyclospora Stain
Includes:
Basic Fuchsin, Ethanol, Phenol, Sulfuric Acid, Malachite Green
Format:
Pack
Hazmat:
No
WeightUOM:
LB