No fixation required with this stain. Utilized in both stat and routine laboratories. Only two solutions are necessary to obtain excellent staining characteristics. Matching buffer solution allows uniform staining of all cellular elements without precipitate or artifactual changes.
STAIN CONTAINER SHOULD ALWAYS BE SHAKEN BEFORE USE, and the stain placed in the staining container should be mixed periodically.
IN THE EVENT OF COLD WEATHER, allow solution to return to room temperature and SHAKE WELL BEFORE USE.
CONTENTS: Wright Stain, Giemsa Stain, Methanol, Eosin, Buffers, Stabilizers
These solutions are made from certified dyes (when applicable).
FOR IN VITRO DIAGNOSTIC USE ONLY.
RECOMMENDED PROCEDURE: Place slide in stain for 20 seconds. DO NOT AGITATE. Place slide in buffer (water, if used, see NOTE) for 20 seconds depending upon color desired. DO NOT AGITATE. For a more alkaline (blue) stain, decrease time in buffer solution. For a more acid (red) stain, increase time in buffer solution. To facilitate adequate cleansing of slide, shake 3 - 4 times in buffer solution. Allow to dry. NOTE: For more intense staining, increase time in stain and buffer solution. We have noted that in some areas the tap water as well as distilled water varies in pH.This will result in improper staining. We recommend that our buffer solution be used to maintain consistency in staining quality. If water is used, check pH of the water to be in the range of 6.7 to under 6.8.
- UPC:
- 12352142
- Availability:
- Lead Time: 3-5 Days
- Type:
- Stat-Quick Wright Giemsa Stain
- Includes:
- Wright Stain, Giemsa Stain, Methanol, Eosin, Buffers, Stabilizers
- Format:
- Pack
- Hazmat:
- No
- WeightUOM:
- LB
